Michael’s Fatty B
An all road adventure bike collaboration between Michael, Adam at NYF paint, and myself. A bike equally at home on commutes, day rides as well as longer loaded touring. Lots of neat little details on this one: A 3 way switch to control the lights and charger, stem clamp Garmin mount, seat tube mounted blinky holder, lowrider-esque dry bag carriers (Cerakote by Black Magic Paint), along with the usual custom rack, stem, and integrated lighting. Phew!
Build process photos over here – https://www.jonny-cycles.com/build-photos-michaels-fatty-b/
| Hanbdlebars | Sim Works Wild Honey 47 cm wide |
| Handlebar Tape | Black Cinelli Gel Cork |
| Stem | Jonny Cycles 1 1/8 threadless x 25.4 or 31.8 mm bar clamp, integrated decaleur, Garmin mount, and wiring out for charger in bag |
| Headset Upper | Cane Creek 110 1 1/8″ external |
| Headset Lower | Cane Creek 110 1 1/8″ external |
| Headset pre-load | Problem Solvers Micro Adjustable Headset Spacer. 12mm Height |
| Saddle | Brooks Cambium C17 Carved All Weather Saddle |
| Seatpost | Redshift ShockStop Suspension Seatpost – 27.2 x 350mm, 35mm Maximum Travel, Aluminum, Black |
| Brake Levers | Gevenalle Audax short pull, no shifters |
| Shift Levers | Shimano Dura Ace Bar End |
| Shift cables and housing | included with shift levers |
| Front Derailleur | Shimano 105 SC New Old Stock Front Derailluer, braze on |
| Rear Derailleur | Shimano Ultegra RD-R8000-GS, Medium Cage, 11 speed |
| Chain | Shimano CN-HG601-11 Chain |
| Cassette | Shimano105 CS-R7000 Cassette – 11 Speed, 11-12-13-14-16-18-20-22-25-28-32 |
| Crankset | Rene Herse 44/28 with ramped/pinned rings |
| Bottom Bracket | IRD QB 95 square taper |
| Front brake | TRP Sprye Flat Mount |
| Front brake mounting adaptor | TRP 140/160 front mount |
| Rear brake | TRP Sprye Flat Mount |
| Rear Brake Mounting adaptor | Shimano 160 Flat Mount |
| Front Rotor | SRAM CenterLine Disc Brake Rotor – 160mm, Center Lock, Silver |
| Rear Rotor | SRAM CenterLine Disc Brake Rotor – 160mm, Center Lock, Silver |
| Brake housing | Jagwire compressionless housing |
| Brake Cables | Road Stainless |
| Rear Brake Cable Hanger | n/r |
| Front Rim | Velocity Blunt SS, 32h. Silver |
| Rear Rim | Velocity Blunt SS, 32h. Silver |
| Front Hub | SONdelux SL Widebody connectorless, disc brake, 12mm thru axle, silver , centerlock disc |
| Rear Hub | Ultegra FH-RS770, 12mm thru axle x 142mm spacing, 32h |
| Spokes | DT Swiss Revolution, silver, brass nipples |
| Tires | Rene Herse Switchback Hill, 650b x 48mm |
| Valve stems | My current favorte: Muc off. They are pretty good at not clogging. |
| Rim Strips | Stans |
| Sealant | Orange Seal Endurance |
| Spare Tubes | |
| Front thru axle | Robert Axle Project 12mm Lightning Bolt Thru Axle – Front – Length: 125mm Thread: 1.5mm |
| Rear thru axle | 12mm Paragon Machine works bolt |
| Fenders | Honjo H80 650b XL |
| Front Light | SON Edelux II, hanging mount no switch |
| Rear Light | Busch & Muller Secula plus, fender mount, modified for style and higher position on fender |
| Custom light housing | |
| Planet Bike Rojo 100 rechargable. Seat tube mount | |
| Custom seat tube mount for blinky | |
| USB Charger | Sinewave Revolution |
| Stem Switch | Light|Off|Charge Greyhill Series 77 3 position 77P36-01-1-03N |
| Switch Knob | Custom Jonny Cycles |
| Wiring | Velo Lumino 22g for internal routng |
| Front Handlebar Bag Support Rack | Custom Jonny Cycles |
| Decaleur | Rene Herse |
| Handlebar Bag | Ruthworks ultralight 10″ |
| Black | |
| Lowrider Rack | Jonny Cycles |
| Front panniers | Dry Bags |
| Bottle Cages | King Cage Iris x 2 |
| Computer/phone mount | Custom Garmin adaptor |